Shuaiyin

[mrgrooves666]

Has anybody ordered anything recently from Shuaiyin? I want to get a pair of them C414 bodies, but I've been emailing [email protected] Maggie/Hui many times, and have not recieved a single response.
Are they still selling bodies to DIY community?

 

[OneRoomStudio]

I've been ordering from Shengyin Electronics - specifically, Jenny ([email protected]), and she has been great. The M49 yoke I recently ordered arrived in less than 48 hours! I also ordered my 414 bodies from them.

 

[Migs 31]

I've been ordering from Shengyin Electronics - specifically, Jenny ([email protected]), and she has been great. The M49 yoke I recently ordered arrived in less than 48 hours! I also ordered my 414 bodies from them.

Yep,
I second what @OneRoomStudio said.
Got e-mails from them concerning those products, recently. Great service!

[email protected]


M

 

[klem]

Can anyone confirm if the M49 Binder body sold by Jenny / SSY fit the PCBs from Dany / VMPCB?

 

[Migs 31]

Can anyone confirm if the M49 Binder body sold by Jenny / SSY fit the PCBs from Dany / VMPCB?

Could you be so kind as to post those measurements (Dany’s PCB) on this thread, so one of us can check that ?
M

 

[klem]

Having never built an M49 before and not reviewing the build thread here for some time, I'm unsure what holes are relevant. There was also talk of an additional top plate IIRC... a number of ways things could not to be compatible, so hopefully someone that has both the PCB set from VMPCB and a body from SSY can chime in. I believe the SSY body has three mounting holes at its base, knowing the distance between each of them would be a great first step. My understanding is Dany's boards are not compatible with a the XLR connector version of the body, I'm asking for the Binder version. Thanks for any insight from you or others!

 

[Vac11]

Can anyone confirm if the M49 Binder body sold by Jenny / SSY fit the PCBs from Dany / VMPCB?

You're gonna need an adapter. The circular base of the "Binder M49 style body" is 66mm in diameter. Poctop's circuit boards are smaller in diameter and don't fit the three mounting holes in the body base part.

 

[mmadu]

Shuaiyin is a company from Shanghai, China. As far as I know, they are usually only interested in mass production, such as Avantone or Advanced Audio (you can find this by comparing their products)