sonicmook56
Well-known member
Hi-
I've owned a logex 8 20 channel board for a few years now, and now that I finaly have a real multi track with bal. I/O, I was thinking of ways to easly ballance the line input. Here is the schematic..pretty simple
looks to me like the budget construction of this board prohibited a TRS jack, and it could "probably" be modded like this...or maybe there was a good reason to keep it single ended.
Does anyone see anything wrong with this? I'm a bit worried about the higher signal going threw the whole thing, but that could be trimmed with the "tape gain" adjustment.
On the bus outputs and Mix Bus output, I was thinking about using a transformer to do the job. Someone on the soundworkshops yahoo group recomended the Cinemag CMOB-2S, at $21.50 a piece, I could just buy a few at a time and have a really fun console.
Am I overlooking anything?
I've owned a logex 8 20 channel board for a few years now, and now that I finaly have a real multi track with bal. I/O, I was thinking of ways to easly ballance the line input. Here is the schematic..pretty simple
looks to me like the budget construction of this board prohibited a TRS jack, and it could "probably" be modded like this...or maybe there was a good reason to keep it single ended.
Does anyone see anything wrong with this? I'm a bit worried about the higher signal going threw the whole thing, but that could be trimmed with the "tape gain" adjustment.
On the bus outputs and Mix Bus output, I was thinking about using a transformer to do the job. Someone on the soundworkshops yahoo group recomended the Cinemag CMOB-2S, at $21.50 a piece, I could just buy a few at a time and have a really fun console.
Am I overlooking anything?