SSL EQ X-Rack in your own box

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

atticmike

Well-known member
Joined
Oct 28, 2011
Messages
502
Howdy there,

Has anybody yet figured out how the pins of the current x-rack generation of ssl work such as the EQs in order to hook em up in your own box instead of the overpriced x-rack?

Cheers
 
oh and here are a few shots of one of the modules:

looks like it runs +15 / -15 and +5V ?

Just a matter now figuring out which pins serve the powering purpose since the symmetry obviously takes place onboard (luckily, unlike the 5000 modules).

PS: Would this make sense?

q1.jpg


1600-XRackEQSt_detail3.jpg


1600-XRackEQSt_detail6.jpg


1600-XRackEQSt_detail7.jpg


1600-XRackEQSt_detail8.jpg
 
Nobody around can help me out?

Also, how much mA is the EQ gonna take up do you suppose?

Guessing that it'll need more than 500 mA I could certainly exclude right?

Intending to run it with another ant telefunken eq with one psu.

JLM PowerStation Ver. 3 kit should suffice right?
 
Back
Top