Brian Roth
Well-known member
Not sure where to post this, so it's here! here are a bunch of 500 racks sold these days. Some of the fancy ones have switching on the rear panel to engage the edge connectors' pin 6 links between modules. Some appear to have internal jumpers. Some racks MAY have pin sixes tied together in an odd/even slot configuration; ie, 1-2, 3-4, etc.
What I'm curious about is how handle a pair of 2-space wide compressors such as the AML 52F50 which takes up two slots. I need to check to see if pin 6 of both edge connectors are tied together in that module, however. It's a bit of an unknown. Just curious about the various possibilities.
Bri
What I'm curious about is how handle a pair of 2-space wide compressors such as the AML 52F50 which takes up two slots. I need to check to see if pin 6 of both edge connectors are tied together in that module, however. It's a bit of an unknown. Just curious about the various possibilities.
Bri
