Stereomama.com - Guitar & Bass PCBs - *NEW* Tubescreamer clone

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

stereomama

New member
Joined
Jan 28, 2015
Messages
1
Hello Folks,
Here are our first products for guitar & bass diy ! Our high quality PCBs feature:

  • 3PDT & LED footprint, no wiring to do.
  • Standard 2'54 Molex connectors for jacks, dc-jacks, pots and battery. Wiring is also possible if no connectors wanted.
  • M3 mouting hole for rack/instrument integration.

We ship worldwide by International Mail with tracking number, no cheap economic shipping !
It starts at 5€ for 1-4 PCBs US Shipping. Feel free to contact us here or at [email protected], we'd be glad to help you.

We also sell full kits, feel free to contact us for shipping informations.

We accept PAYPAL, just send us a mail at [email protected] to order.
We also do quantity discount for group buy.





SUPER SCREAMER - Tube Screamer TS808 clone with mods - 11€

The SUPER SCREAMER is a Tube Screamer TS-808 clone.
It's one of the most famous overdrive pedal. We added two modifications to it:

Clipping switch: you can choose between symmetrical clipping (standard) or asymmetrical clipping mode. Asymmetrical clipping gives more harmonics and a warmer sound.

Tone switch: this switch increases the low frequencies of the distortion.


Sound samples here: http://www.stereomama.com/shop/product_info.php?cPath=23&products_id=40&language=en

SUPERSCREAMER-pcbf-lo.png

SUPERSCREAMER-pcbb-lo.png

SUPERSCREAMER-2-lo.png





OCTAVE FUZZ - Roger Mayer Octavia clone - 11€

The OCTAVE FUZZ is a clone of the famous RM Octavia. It's a vintage fuzz mixed with an octave up effect.
If you're looking for the Jimi Hendrix's "Purple Haze" sound, this is the right project !


Sound samples here: http://www.stereomama.com/shop/product_info.php?cPath=22&products_id=38

OCTAVEFUZZ-pcbf-lo.png

OCTAVEFUZZ-pcbb-lo.png

OCTAVEFUZZ-2-lo.png





FAT BOOSTER - Super Hard On clone - 7€

The FAT BOOSTER is a Super Hard On clone.
It's a very powerfull boost that can be used in different ways:

Volume boost, for your lead parts.
Gain boost, when placed before a distortion.
Pre-amp, to warm your sound.


Sound samples here: http://www.stereomama.com/shop/product_info.php?cPath=22&products_id=34

fatbooster-pcbf-lo.png

fatbooster-pcbb-lo.png

fatbooster-2-lo.png





BASS FUZZ - Woolly Mammoth clone - 9€

It's a powerfull modern sounding bass fuzz that doesn't cut the low end of your instrument. It was designed for bass guitar but it also works very well on guitar and synths.

Sound samples here: http://www.stereomama.com/shop/product_info.php?cPath=22&products_id=29

BASSFUZZ-pcb-front-lo.png

BASSFUZZ-pcb-back-lo.png

BASSFUZZ-2-lo.png

 
Back
Top