kazper
Well-known member
I'm looking into the possibility of a group buy for parts to assemble the switches for the 1081,1084,1073 projects.
I would like some help on a general consensus on if it's worth while. What switch brand and type for each switch position. I would like a equal too or better switch mechanism with the same rotation as stock units.
There is enough of these projects around to maximize the quantity discount across the board.
I'm thinking the group buy would include the following:
Switches
Pots and attachments to give you the 1/8" through shaft
resistors and caps as per required by project.
Wire (possibly)
I don't want it to be more complicated on me, so it will be done as a set IE one channel 1081 switch set.
Kevin
I would like some help on a general consensus on if it's worth while. What switch brand and type for each switch position. I would like a equal too or better switch mechanism with the same rotation as stock units.
There is enough of these projects around to maximize the quantity discount across the board.
I'm thinking the group buy would include the following:
Switches
Pots and attachments to give you the 1/8" through shaft
resistors and caps as per required by project.
Wire (possibly)
I don't want it to be more complicated on me, so it will be done as a set IE one channel 1081 switch set.
Kevin