a soBer Newt
Well-known member
Hello Everyone, I got the idea for this from Moosapotomus DIY stompbox the Paralooper.
I was hoping that you all might give me some pointers on anything that I may have done wrong before I go and do a PCB layout.
I am thinking about doing DC Servos on each input section to avoid capacitors in the audio path.
I also need to check about the values on the input pad so that I have unity gain in the circuit.
Thank you for any advice.
AuxBox
I was hoping that you all might give me some pointers on anything that I may have done wrong before I go and do a PCB layout.
I am thinking about doing DC Servos on each input section to avoid capacitors in the audio path.
I also need to check about the values on the input pad so that I have unity gain in the circuit.
Thank you for any advice.
AuxBox