Universal Audio SC-1 Hemisphere Mic Modeling Is a Behringer

[sumitagarwal]

Here you are! Should work in Space Designer. Let me know how you get on.

Phenomenal! I'm getting a B-1 as soon as I'm back from Thanksgiving travel. For now to test out the workflow and proof-of-concept I'm using a Rode NT1-A which I don't remember buying...

Over on the UAD forums I seem to have gotten confirmation that the Hemisphere software comes with the models for all of their source mics, not just the source mic that was registered. This seems to mean that a $100 SD-3 would unlock all of that modeling (including B-1 modeling) plus you get a free dynamic mic with it

Makes me wonder what other UA mics may be simple rebrands of existing ones. From what I'm seeing UA doesn't list specs like diaphragm size, which makes narrowing things down trickier.

Will keep you posted on how the IR works, thanks again!

 

[SubSpec]

Makes me wonder what other UA mics may be simple rebrands of existing ones.

https://groupdiy.com/threads/300-universal-audio-sd-1-is-the-60-t-bone-bc500.79887/
https://groupdiy.com/threads/disassembling-a-ua-sp-1.87004/

 

[sumitagarwal]

https://groupdiy.com/threads/300-universal-audio-sd-1-is-the-60-t-bone-bc500.79887/
https://groupdiy.com/threads/disassembling-a-ua-sp-1.87004/

Hah, I'm a dummy. How did I not find this before?

On the plus-side: now we know all it takes is a cheap used SD-3 to make any of those other cheap mics perform a bit better.