Bo Deadly
Well-known member
BI/TT P092N and P0925N dual section 9mm potentimeters have decent availability at the moment:
https://www.eciaauthorized.com/en/search/P092N
They're also conductive plastic. Not sure about tracking. I have never actually purchase or used one of these (yet).
Look at the end of the part code for CR50K. The C means reverse log. So BR10K would be 10K linear, AR100K would be 100K audio, etc.
At this particular moment there are dual section P092N stocked for:
linear 10K
linear 20K
linear 500K
audio 10k
audio 20K
audio 100K
reverse log 100K
and there's also P0925N which is the vertical mount (these look like they're the same 10mm height / form factor as the Alpha 9mm vertical mount which I like):
linear 10K
linear 20K
linear 50K
audio 10K
audio 100K
reverse 500K
Reverse log 100K is probably just about right for an EQ like an SVF. If tracking is bad, maybe try linear 500k with law bending resistor in non-rheostat arrangement.
https://www.eciaauthorized.com/en/search/P092N
They're also conductive plastic. Not sure about tracking. I have never actually purchase or used one of these (yet).
Look at the end of the part code for CR50K. The C means reverse log. So BR10K would be 10K linear, AR100K would be 100K audio, etc.
At this particular moment there are dual section P092N stocked for:
linear 10K
linear 20K
linear 500K
audio 10k
audio 20K
audio 100K
reverse log 100K
and there's also P0925N which is the vertical mount (these look like they're the same 10mm height / form factor as the Alpha 9mm vertical mount which I like):
linear 10K
linear 20K
linear 50K
audio 10K
audio 100K
reverse 500K
Reverse log 100K is probably just about right for an EQ like an SVF. If tracking is bad, maybe try linear 500k with law bending resistor in non-rheostat arrangement.