Valley People

[alanhyatt]

• Trans-Amp LZ MP-1000 plug-in mic preamp, schematics and applications
  
  
• EGC-101 engineering data and schematics (alternate doc from the one previously posted)
  
  
• EGC 202 retrofit for dbx 202 engineering data and schematics

Hello all,

Just so all of you are aware... Allison Research, which become Valley People, and Valley International was purchased by PMI Audio in 2006. All of these documents and schematics are our intellectual property. I am not concerned about the documents being posted, however, please be aware should any of this become a product for commercial use, I will defend our intellectual property rights. We are beginning to design and produce Valley again by the end of this year. We are currently producing the original TA-101's using the original Valley jigs, milling machines, and test gear, which we will use the TA-101 on the new Dyna-Mite, and Commander. Other models will follow..... We continue to develop these with the original assistant to Paul Buff...Doc Morgan. Doc has been a wealth of knowledge on how to incorporate these designs and VCA builds in accordance to the original designer...Paul Buff...

 

[zzzzz]

Hello all,

Just so all of you are aware... Allison Research, which become Valley People, and Valley International was purchased by PMI Audio in 2006. All of these documents and schematics are our intellectual property. I am not concerned about the documents being posted, however, please be aware should any of this become a product for commercial use, I will defend our intellectual property rights. We are beginning to design and produce Valley again by the end of this year. We are currently producing the original TA-101's using the original Valley jigs, milling machines, and test gear, which we will use the TA-101 on the new Dyna-Mite, and Commander. Other models will follow..... We continue to develop these with the original assistant to Paul Buff...Doc Morgan. Doc has been a wealth of knowledge on how to incorporate these designs and VCA builds in accordance to the original designer...Paul Buff...

Hey Alan, I removed my own document uploads in this thread as a courtesy out of respect. Very excited to hear about the TA-101 and other reissues!

I know “no discussion in the tech docs” forum but would be super cool to see the TA-101 available for DIY-ers