We prepare for manufacture Voice Processor

[Hand Crafted Laboratories]

We prepare for manufacture for the new device - Voice Processor/Channell strip, is possible with AD/DA converters. In all a question - what type of an equalizer is more preferable in opinion of the user? And whether the equalizer in general is necessary?

discuss about other our gears hear -
http://www.groupdiy.com/index.php?topic=8604
http://www.groupdiy.com/index.php?topic=8659
http://www.gearslutz.com/board/showthread.php3?t=37823

 

[rafafredd]

Sorry, but I think that if you won´t post a schematic of your new voice processor, it should be at the brewery, or at the Black Market.

 

[Sammas]

Wow!

Posted in every section but the right one...


This isn't a place to try and sell your products... I'm pretty sure i speak for everyone when i say...

RACK OFF!! :evil:

 

[Hand Crafted Laboratories]

Yes, really??? And we unless suggest to buy? We writing :
------------------------------------------------------------------
We are made this things -
http://papa-movie.com/html/micropnone.html
ready microphones and components
and others - full tube gears -
http://papa-movie.com/html/hand_crafted.html
Pre amp,Leveller,Line Mixer, Di-Box
-----------------------------------------------------------------
We show that we do - and TO BUY (the device or a component-for of components from us ask about the price) much or not - everyone can solve independently.
But not looking, on that that we do not suggest to buy - in us constantly order components - be quiet,calm down - any more the finished our device has not been bought by members of this forum-we on it and did not count never. For this purpose there are other places - and there business on the finished devices goes with rather accrueing effect.

 

[rodabod]

HCL,

Look at what happened with JZ and his "Violet" microphones.

Be careful. You do not want to get in that situation. Your posts sound too "commercial". We are not here to make money.

Like I replied in your other post, try and discuss things and gives us your input. I am sure you have a lot information and good advice - share it with us and we will do the same.

 

[Hand Crafted Laboratories]

We here have only asked opinion about EQ - and who has wanted, that can express it. At what here business? It is So much words - and full flud. Russian go - war of the worlds? Well, we have understood. It was necessary to go today on fishing, heavy day :grin: :grin: :grin:

 

[gyraf]

Handcrafted,

I think there are some misunderstandings because of language and writing style. Don't worry too much about it, if you stick around here for some time, you'll get to know how we're interacting in this forum. Anyway, it's always nice to have people from manufacturing here - but we'd appreciate if you would also share your knowledge by helping other forum members and brining forward information.

For your question: If you're planning a unit mainly aimed at vocal use, I'd recommend a pultec-style equalizer, probably with a bit more bands in top boost - that is more selectable frequencies, specially in the range around 1-3KHz. Maybe also a larger selection of low-frequencies, individual cut and boost low frequencies comes to mind.

An important part of studio-electronics design is having the unit tested in an actual studio, and getting good feedback from the engineer(s) that has used them. It's nearly impossible to build something genuinely useable from theory alone...

Jakob E.

 

[Hand Crafted Laboratories]

Thanks,Jakob.
This another matter. We also think, that manufacturers and DIY ` s should not be at war. Ourselves was DIY ` s (that to hide - and and for today DIY ` s) - and just because we do not wish to buy that we can make independently. Still time of thanks for kind words,Jakob.