either something is wrong with the transformer or something is wrong with me....
im feeding a 100mV 1Khz signal into an oep 262a3e (primaries in series-signal on both sides),
on sec. im conecting one side of the windings (in series) to ground.nothing comes out.
should i reference one side of the pri. to ground?
can someone try to iluminate me?
im feeding a 100mV 1Khz signal into an oep 262a3e (primaries in series-signal on both sides),
on sec. im conecting one side of the windings (in series) to ground.nothing comes out.
should i reference one side of the pri. to ground?
can someone try to iluminate me?