iturnknobs
Well-known member
Hoping someone has an extra laying around. One of mine was bad out of the box. One open side of the secondary. Any repair suggestions?
I will call the functioning trafo "A" and the non-functioning trafo "B":
1) Both trafos read approx 910 ohms at primary(GRN/RED)
2) Trafo "A" reads 105 ohms across BL and YEL with WHT/WHTBLK tied together
3) Trafo "B" reads open circuit arcoss BL and YEL with WHT/WHTBLK tied together
I then un-tied white and white/black and tested again:
Trafo A Trafo B
YEL to WHT- 91.5 ohms YEL to WHT- 50.4 ohms
BLU to WHTBLK- 50.8 ohms BLU to WHTBLK- OPEN
A) Is it strange that opposite sides of the secondary test the same?
B) Do my results indicate that trafo "B" is bad?
Any help, or replacement trafos would be appreciated.
Thanks.
I will call the functioning trafo "A" and the non-functioning trafo "B":
1) Both trafos read approx 910 ohms at primary(GRN/RED)
2) Trafo "A" reads 105 ohms across BL and YEL with WHT/WHTBLK tied together
3) Trafo "B" reads open circuit arcoss BL and YEL with WHT/WHTBLK tied together
I then un-tied white and white/black and tested again:
Trafo A Trafo B
YEL to WHT- 91.5 ohms YEL to WHT- 50.4 ohms
BLU to WHTBLK- 50.8 ohms BLU to WHTBLK- OPEN
A) Is it strange that opposite sides of the secondary test the same?
B) Do my results indicate that trafo "B" is bad?
Any help, or replacement trafos would be appreciated.
Thanks.