kante1603
Well-known member
Hello there,
thought I should post this.
Have built it early this year;sounds excellent and is dead-quiet to my ears.
Panel is from Schaeffer,knobs are Mentor,left meter for compression is AL19 presentor,the right ones are jlm audio (as you can see).
Mains switch and that in the middle is from Rafi.Guess what the middle switch does...
It has the crc-board also.
To state very clear if bypassed or not the off-function switches off the lights in the compression meter while a small blue led goes on at the bypass switch where On is written.
Another detail is that the vu meters on the right can be switched from input to output (I love having the unit in a rack some meters away and getting an idea of what is happening even when leaving the console).
Sorry for the not-so-good pics:I am not good at taking them...
I would like to thank all of you here for helping to make builts like this possible,especially Jacob for sharing the schemos,keith aka ssl-tech for the mods,rochey at diyparts for the special parts (CRC and Turbo),joe at jlm audio for vu driverboards and meters (and the always nice conversations we had!) and last but not least chef at audiokitchen for the main pcbs.
Now the pics....
Best regards from germany-and thank you so much again!!!
Udo.
thought I should post this.
Have built it early this year;sounds excellent and is dead-quiet to my ears.
Panel is from Schaeffer,knobs are Mentor,left meter for compression is AL19 presentor,the right ones are jlm audio (as you can see).
Mains switch and that in the middle is from Rafi.Guess what the middle switch does...
It has the crc-board also.
To state very clear if bypassed or not the off-function switches off the lights in the compression meter while a small blue led goes on at the bypass switch where On is written.
Another detail is that the vu meters on the right can be switched from input to output (I love having the unit in a rack some meters away and getting an idea of what is happening even when leaving the console).
Sorry for the not-so-good pics:I am not good at taking them...
I would like to thank all of you here for helping to make builts like this possible,especially Jacob for sharing the schemos,keith aka ssl-tech for the mods,rochey at diyparts for the special parts (CRC and Turbo),joe at jlm audio for vu driverboards and meters (and the always nice conversations we had!) and last but not least chef at audiokitchen for the main pcbs.
Now the pics....
Best regards from germany-and thank you so much again!!!
Udo.