canidoit

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #280 on: January 25, 2010, 07:48:05 PM »
OK boys,
Ed is nearing completion of the output transformer development and AndyP reckons my poo doesn't stink with this module, so what I will be offering will be.........

PCB set (mainboard & amp boards)
500 series metalwork
mounting hardware
2 toggle switches
Heatsink
Sockets & pins for the amps
P&P included

That lot will set you back 135GBP per channel, plus 4% paypal fees.

If you're up for it.... paypal (at) lazpro.com
Peter, I am working out my finance at the moment. How much would it bring the total costs up with the transformers and other parts to build this project?
iva dunit formerly known as canidoit


Re: 500 series Neve 1084 eq... taking orders
« Reply #281 on: January 25, 2010, 07:50:45 PM »
Reckon on 400-450 quid.
http://www.lazpro.com
I reserve the right to not sell to idiots

tommypiper

Re: 500 series Neve 1084 eq... taking orders
« Reply #282 on: January 25, 2010, 08:06:56 PM »
I think I'll put mine in a rack box to accomodate the Lundahl outputs.  Therefore, can I buy minus the 500 metalwork and hardware but with faceplate?
Imagine a wet, slightly chilled from its gas release and decompression, with water droplets condensing, sucking surface tension, slowly sliding down the side, capped by a healthy virgin froth on top..

Re: 500 series Neve 1084 eq... taking orders
« Reply #283 on: January 25, 2010, 08:09:08 PM »
I think I'll put mine in a rack box to accomodate the Lundahl outputs.  Therefore, can I buy minus the 500 metalwork and hardware but with faceplate?

Not really.
You'd be better off buying Bluzzi's effort.
http://www.lazpro.com
I reserve the right to not sell to idiots

canidoit

Re: 500 series Neve 1084 eq... taking orders
« Reply #284 on: January 25, 2010, 08:19:13 PM »
Paid for a EQN 1084 kit.

I am not familiar with this build process, so if anyone have any BOM list for this build that I can use as a foundation for my build would be great.  :) Like with reference to part numbers or suppliers, etc.

I would also like to know what parts people are using to produce the results they are getting with their EQ build so that it will help me decide what parts to purchase.

Has all issues in regards to the low headroom or any bugs been sorted out?

Thanks
iva dunit formerly known as canidoit

Re: 500 series Neve 1084 eq... taking orders
« Reply #285 on: January 25, 2010, 08:29:33 PM »
Cheers.
I'll have a proper bom shortly.
Ed is almost there with the transformer.
http://www.lazpro.com
I reserve the right to not sell to idiots

canidoit

Re: 500 series Neve 1084 eq... taking orders
« Reply #286 on: January 26, 2010, 04:44:29 AM »
If anyone from Australia wanna share on buying parts for this build and save on shipping, message me. I am also planning on building the 1073 500 series pre that onlymee will be selling.
iva dunit formerly known as canidoit

Re: Neve 1084 eq... pre orders.. CLOSING 1st FEB
« Reply #287 on: January 27, 2010, 06:06:10 AM »
I'm going to close the order on the 1st of February, so if you want in... kindly stick your name in the White Market thread.
I'll only be ordering enough to cover the list.

peter
http://www.lazpro.com
I reserve the right to not sell to idiots

[silent:arts]

Re: Neve 1084 eq... pre orders.. CLOSING 1st FEB
« Reply #288 on: January 27, 2010, 07:02:52 AM »
you are a bad boy :o
2 for me Sir Peter.
will paypal once I'm done with my opticals today.
SSLtech: No bypass, I don't believe in it.
Gus: I think this build might have problems with DIY builders that don't know things like ohms law.

Moses

Re: Neve 1084 eq... pre orders.. CLOSING 1st FEB
« Reply #289 on: January 27, 2010, 07:58:31 AM »
Peter,

You make me very sad... I have no pennies until mid-late February... Bad times!

Mo


Re: Neve 1084 eq... pre orders.. CLOSING 1st FEB
« Reply #290 on: January 27, 2010, 08:15:09 AM »
Mo,
If you want some, then get on the list.... It's just that I'm only ordering as many as are needed.
http://www.lazpro.com
I reserve the right to not sell to idiots

jsteiger

Re: Neve 1084 eq... pre orders.. CLOSING 1st FEB
« Reply #291 on: January 27, 2010, 09:13:57 AM »
Hi Peter,

Funds sent for a pair of your eq kits.  8)

I believe I read somewhere that Mike will be handling Ed's N-style iron at his Hairball shop? That will be nice and convenient.

Thanks you lovely bastard!  ;D

Cheers, Jeff
Visit the CAPI store at http://www.capi-gear.com

CAPI is not affiliated with, endorsed by, or sponsored by API.

Re: Neve 1084 eq... pre orders.. CLOSING 1st FEB
« Reply #292 on: January 27, 2010, 09:17:17 AM »
Cheers Jeff.
Yes... old hairy bollox is the man for iron.
http://www.lazpro.com
I reserve the right to not sell to idiots

AW_music

Re: Neve 1084 eq... pre orders.. CLOSING 31st JAN
« Reply #293 on: January 28, 2010, 07:28:53 AM »
Hi peter,
i'm in for TWO kits .

Regards
A=A

Re: Neve 1084 eq... pre orders.. CLOSING 31st JAN
« Reply #294 on: January 29, 2010, 08:49:53 AM »
roger roger
http://www.lazpro.com
I reserve the right to not sell to idiots

morbleu

Re: Neve 500 series 1084 eq... pre orders.. CLOSING 31st JAN
« Reply #295 on: January 31, 2010, 04:32:34 AM »
Hi peter,
looks like the last chance.. ;D I'd like to have 2 kits.
thanks,
andreas

Re: Neve 500 series 1084 eq... pre orders.. CLOSING 31st JAN
« Reply #296 on: January 31, 2010, 10:42:31 AM »
OK... you're on the list.
http://www.lazpro.com
I reserve the right to not sell to idiots

MM1100

Re: Neve 500 series 1084 eq... pre orders.. CLOSING 31st JAN
« Reply #297 on: January 31, 2010, 04:02:56 PM »
Paypal sent for 1 kit.

Thanks Peter!

Re: Neve 500 series 1084 eq... pre orders.. CLOSING 31st JAN
« Reply #298 on: January 31, 2010, 04:07:08 PM »
Ayethenyaw
http://www.lazpro.com
I reserve the right to not sell to idiots

mylesgm

Re: Neve 500 series 1084 eq... pre orders.. CLOSED
« Reply #299 on: May 20, 2010, 02:38:59 AM »
any chance of another round?

M
Check my work at www.mylesmumford.com