News:

Happy New Year!


Timothytitus88

Re: 3020T- DJ CNC Users thread
« Reply #140 on: August 24, 2016, 08:58:43 AM »

Ahhh. Yes, I have been looking at Banggood, to try and work out which you have.. (and you do use the terminology "drills" which is a little confusing)

You need to go for flat (square) bottom one or two flute endmills. The only ones I see there that might be suitable are "3.175mm Carbide CNC 2 Flute Spiralbohrer Schaftfräser Router 8mm" or if you must go small.. "1.0mm 4mm CEL 2 Flute Carbide Flachkopffräser Fräser"

The rotary rasps or rotary burrs are not suitable (they are more for composite materials like PCB's)

I currently have some cheap 2 flute endmills on order from Ebay to try out... but until I do I can not really comment on the price differences.

Cheers,

T


ruffrecords

Re: 3020T- DJ CNC Users thread
« Reply #141 on: August 24, 2016, 07:59:47 PM »
I will chek the boxes for the bangood parts numbers and post here.

Cheers

Ian