found this on youtube

shop deals on amazon
Advertise with us
Shop deals on ebay
GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
A bit hard to tell what is on the round PCB.
I see the standard DC/DC converter for + and - 60 V. ( ? )
As far as I can see the headbasket is not very open, the layers of mesh look pretty dense.
And I don't think it is a very good idea to have the thread for the microphone stand in the bottom of the microphone.
(Also the microphone looks pretty ugly to me, but that is probably personal...)
 
Gus said:
It looks like it could be a Schoeps type +- capsule supply (trim might adjust the capsule voltage) and I would QUESS something like a 87 circuit because of the transformer and capsule
interesting at about 6:50
https://www.youtube.com/watch?v=4PzRCPRTPv0
Click to expand...
They made a couple of controversial choices, such as direct-mount without suspension and built-in pop filter, which for bedroom podcasting make sense. Surely, a lot of industrial design has gone in it, as well as in their other products. Nothing revolutionary but there is probably a market for it; I would think the "made in UK" factor is a bonus for them in Brexit times.
 

Similar threads

G
I found this
Replies
8
Views
894
McIrish
McIrish
RuudNL
Simple transformerless compressor
Replies
8
Views
1K
abbey road d enfer
A
W
OPEN SOURCE DIY Mic Project - ORS 87 - Stripped Down u87
13 14 15
Replies
299
Views
18K
Wordsushi
W
K
Diy Push-Pull symetrical undamped F8 capsule
2
Replies
36
Views
4K
adamasnan
A
M
"Manleyish" Tube Microphone (ST51 + SCT 800)
Replies
0
Views
979
Mauritius89
M

Latest posts

Back
Top