3nity
Well-known member
Heres what i've been doing when free time is available!!
4 channels of my own kits....But i changed the pushbuttons to toggles.
Its different and difficult to solder the solidwire and then bending like a pcb toggle!
Here are the shots (i dont have any clue on photography)
Front done locally, actually this is the 2nd time try and it looks better than first time....
Some interior shots....still not 100% satisfied of my wiring but still getting better.
Here you can see the XLR 4 pins from the external psu.
Again the wiring if you pay attention you can see the 1st try at the front panel engraving... lol...
Operational amplifier still not decided...2 are SMD2520 but the remaining 2 still unclear.....maybe Melcor 1731.
I'm enjoyed doing this....i'll enjoy it recording and enjoy the pix!
Thanks to Burdij for the knobs
4 channels of my own kits....But i changed the pushbuttons to toggles.
Its different and difficult to solder the solidwire and then bending like a pcb toggle!
Here are the shots (i dont have any clue on photography)
Front done locally, actually this is the 2nd time try and it looks better than first time....
Some interior shots....still not 100% satisfied of my wiring but still getting better.
Here you can see the XLR 4 pins from the external psu.
Again the wiring if you pay attention you can see the 1st try at the front panel engraving... lol...
Operational amplifier still not decided...2 are SMD2520 but the remaining 2 still unclear.....maybe Melcor 1731.
I'm enjoyed doing this....i'll enjoy it recording and enjoy the pix!
Thanks to Burdij for the knobs