Hi!
Trying to build the THAT 4301 compressor... based on design note 115 (fully adjustable compressor).
And i thought to add the led bargraph compression indicator (design note 112).
After looking at both schematics i think it is possible to make the compressor meter connection (with its buffer U4A 4558) to the inverting node of U2C 4301p, with a 20k in parallel to R16 (30k1), in the schematic of DN115. But i'm not sure... I placed the 20k resistor in series....buff.
attached is a schematic.
Thank you for your help!
Jay x
Trying to build the THAT 4301 compressor... based on design note 115 (fully adjustable compressor).
And i thought to add the led bargraph compression indicator (design note 112).
After looking at both schematics i think it is possible to make the compressor meter connection (with its buffer U4A 4558) to the inverting node of U2C 4301p, with a 20k in parallel to R16 (30k1), in the schematic of DN115. But i'm not sure... I placed the 20k resistor in series....buff.
attached is a schematic.
Thank you for your help!
Jay x