Sousaphone
Member
Hello ,
I have a beck mixer/PA system. it has 6 channels each with a valve preamp which feeds to a 100w solid state power amplifier. I would like to separate the mixer section from the power amp and configure the mixing section to be LCR, with line level outputs. Is there anyone on this forum who I could commission to do this? Thanks , Dylan
I have a beck mixer/PA system. it has 6 channels each with a valve preamp which feeds to a 100w solid state power amplifier. I would like to separate the mixer section from the power amp and configure the mixing section to be LCR, with line level outputs. Is there anyone on this forum who I could commission to do this? Thanks , Dylan