greenfendr
Member
- Joined
- Oct 28, 2013
- Messages
- 7
I recently installed the advanced audio mod kit (http://advancedaudio.ca/collections/diy/products/apex-460-mod-pack)
and I'm not getting any sound coming from the mic. I tested the mic after I completed the transformer and all the circuit board steps (and it worked fine), but didn't between the capsule, tube, and PSU upgrades. Power is getting to the tube, but no sound is coming out.
Has anyone out there done this mod? I don't know what type of voltages I should be seeing. at the capsule I'm reading 1.13 volts between both sides, but none with reference to ground.
Thanks in advance.
and I'm not getting any sound coming from the mic. I tested the mic after I completed the transformer and all the circuit board steps (and it worked fine), but didn't between the capsule, tube, and PSU upgrades. Power is getting to the tube, but no sound is coming out.
Has anyone out there done this mod? I don't know what type of voltages I should be seeing. at the capsule I'm reading 1.13 volts between both sides, but none with reference to ground.
Thanks in advance.