Built custom channel for Soundcraft Boards (SSL like)

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

q2audio

Well-known member
Joined
Aug 20, 2005
Messages
82
Location
USA
Would this fit a Soundcraft Delta 200? I seem to think the channels are a little narrower in the Delta than the 600. If the length was suitable I could get metalwork done.

Nice work!
 

SIXTYNINER

Well-known member
Joined
Sep 15, 2005
Messages
711
Location
...Somewhere In The Infinity
xarolium said:
…..I decided to update a little bit the channel and add some option like  24 busses, Group input and Mute/Solo control and group via MIDI or with a  "rebuild" master channel…….

… Wow ….  :eek: :eek: :eek:
..a mirage joke of the desert , or  true tangible reality ?

.." Xarolium" …hmm …  ::) ….sound like a so powerful revitalizing drug  :eek: :eek: :eek:
The Resurrector of  old mixing desk ,( "p.T.g.m." - porn Technology genetically modified……)

:eek: :eek: :eek:

midi mute option ( as also available in origin for the 600 desk )
would be the ("available") naked hot Playmate ready on the bed  ;D ;D ;D

are you thinking to do / adapt channel strips also for old Allen & Heat , Soundtracs (similar to Soundcraft), Amek , desks ?

and master bar with balanced insert and transformer output ?

ps:
Compliments for the "Nava".
 

mflemi

New member
Joined
May 5, 2015
Messages
4
Xarolium, I would like at least two of your e906 channels for the SC 600.  What do I need to do to make that happen?
 

echoplex

Well-known member
Joined
Jun 29, 2011
Messages
173
Location
Germany
xarolium said:
The preamp is the SSL9K  but with a LM394 instead of a MAT-02 and it works like a charm.

MAT-02 is obsolete anyways... you could use MAT-12 which is its successor
http://www.analog.com/en/products/analog-functions/matched-transistors/mat12.html#product-overview

this is one of the most interesting and impressing projects around here!
I don't even have a SC 600 but I could look for a faulty one and fully upgrade it.
It seems really worth it  8) :D
 

xarolium

Well-known member
Joined
Feb 5, 2007
Messages
96
First thank you for your support.

This project is in stand by cause i sold my SC600 and buy an Soundtracs Jade.
But if some of you are still interesting to get this customs channel i can make a run of 100 pcbs + potentiometers + faceplate (for SC600 or other Soundcraft board).
Let me know

Best regards,
xarolium
 

Wiebee

New member
Joined
Sep 9, 2018
Messages
1
Yes please! I would be highly interested in a few strips for an 8000. I love the work you did! Great job! If measurements are needed or anything else, please let me know \m/
 

mokkinger

Well-known member
Joined
Jan 12, 2009
Messages
100
Location
Zurich, CH
Hey, this project looks very cool, and I would love to also take a few strips.
I have a Soundcraft 6000 with 24 Busses, will the strip fit in the 6000 as well?

thanks,
Mark
 

romeojesus

Well-known member
Joined
Jun 4, 2004
Messages
47
Location
cologne, germany
I wish this project would be picked up again...

seriously interested to add some of these channels to my soundcraft venue II if possible !!!

best

christian
 

jazzboxuz

Member
Joined
May 4, 2015
Messages
7
any chance we could get the Gerber files for these boards? or even the CAD eagle files? I'm sure there are plenty of us who would love to pick this up where xarolium left off with this awesome project :)
 

Latest posts

Top