Hi!
I bought and put together a Small Diaphragm Condenser upgrade from microphoneparts.com. It upgrades the mxl 603s. I went through all the trouble shooting in the manual. All the test points show the right voltage etc and everything was seemingly put on the board properly. I have been emailing back and forth with the owner of the website as well. I feel bad bothering him so much, and wanted to see if someone here might be able to help.
I really don't know much about electronics and this is the first time I have soldered something together. I don't have any clue as to why all the tests that are recommended are showing that the microphone should work, but it isn't working. Is there a way that I can learn more about the microphone and how it works so that I can run additional tests and figure it out on my own?
If anyone is interested in helping, I can post pictures of the microphone and the tests.
Thanks,
Mike
I bought and put together a Small Diaphragm Condenser upgrade from microphoneparts.com. It upgrades the mxl 603s. I went through all the trouble shooting in the manual. All the test points show the right voltage etc and everything was seemingly put on the board properly. I have been emailing back and forth with the owner of the website as well. I feel bad bothering him so much, and wanted to see if someone here might be able to help.
I really don't know much about electronics and this is the first time I have soldered something together. I don't have any clue as to why all the tests that are recommended are showing that the microphone should work, but it isn't working. Is there a way that I can learn more about the microphone and how it works so that I can run additional tests and figure it out on my own?
If anyone is interested in helping, I can post pictures of the microphone and the tests.
Thanks,
Mike