DIY Modular Mixer

[pahstah]

Hi Pahstah

What an nice work !!!
"DIY" definitely step up recently with Ian/Holger tube mixer and now yours.
Looking forward to retrofit a moving fader system 

Best
Zam

Zam, that would be the icing on the cake!
I'm already thinking  about a version of this mixer with a separate fader bucket for your moving faders 
This forum and its member are the best!!!

Paolo

P.s. Let's not forget Gary 's Sphere

 

[pahstah]

mixer's done! loaded with 8 helios 69, 2 nv 1073, 2 aphelios, and 4 capi vp28 as line input. i solved the noise problem in the summing part of the console and i've found that aux sum is has less noise than group and 2bus sum!

 

[beatnik]

good job !

 

[Timothytitus88]

Indeed! just marvelous!
T

 

[iprovlek]

Great Pastah! 8) 8) 8)

 

[Rocinante]

Congratulations!  What an inspiration!  Looks beautiful!

 

[audiomixer]

I like it a lot, great looking piece of kit!

- michael

 

[zamproject]

Hi Pahstah

Absolutely great !
Bravo !!!!

Best
Zam

 

[benqbasic]

Wow that thing looks fantastic. Nice work

 

[pahstah]

Thank you so much for the appreciations guys!

her's a shot of the helios channels

 

[anjing]

beautyfull work....what did you use to close the gaps between the buckets?

Regards,

Pierre

 

[pahstah]

Hi Pierre,

there is no gap between the buckets because these are two buckets put together with screws

in this image you see the 8 channel bucket on the right but in the previous image you see that i've put the 8 channel bucket on the left.
I could have made a 16 channel mixer directly with the right length of rails but at the beginning i was going for an eight channel mixer

paolo

Paolo

 

[fragletrollet]

Hello!

Old thread I know, but worth a bump anyways.

Beautiful build. I was wondering; if you don`t mind, why not post pcb and metalwork drawings/schematics here? I know I would appreciate it to use as starting points for designing my own modular mixer. Maybe you have .fpd and pcb files even? So much learning potential  8)