Mind blown - Eagle PCB
"RUN select-sch-group-to-brd-group"
With this command, you can highlight a section in the schematic, switch to board, and they are selected there as well...
I just saved hours of working sorting components into sections by getting familiar with this command, and thought someone else may benefit.
If you have a tip too, share it here!
Gustav
"RUN select-sch-group-to-brd-group"
With this command, you can highlight a section in the schematic, switch to board, and they are selected there as well...
I just saved hours of working sorting components into sections by getting familiar with this command, and thought someone else may benefit.
If you have a tip too, share it here!
Gustav