Electrodyne 709L. I need help racking! Info please!

[Gearguy]

I just got two of thee channel strips and I need a couple things

1) schematics
2) what output transformers pair up good with these?
3) does anyone have any of the pin connectors for the back?
4) any other info on these would be helpful
5) power requirements?
6) is there a line in on the channel already or is that a different card?

I don't know much about these on the tech side. I know the preamp and eq is awesome in use. Any info will help. Thanks much!

 

[njm]

Check the tech docs http://groupdiy.com/index.php?topic=56520.0

I racked up some years ago, I think the edge connector on the rear was the same as the api 500, or at least the same pin pitch. Might be wrong!

709L has a line and mic input, line is unbalanced. I wired the outs unbalanced. The modules pulled 35mA @ 24v each quiescent (no signal, no load, not doing anything...)

As for transformers I dunno what electrodyne used. Any 1:1, probably a Jensen or cinemag being American n that

Cheers
Nick