Focusrite Isa illuminated push button switch? Who makes them?

[elskardio]

Hi Guys,

anyone know who makes the illuminated push button switch for the Focusrite Isa series?

I've been looking everywhere and I can't find anything similar.

Thanks

 

[scott2000]

E Switch makes a bunch of different types.....

like these

https://www.e-switch.com/product-catalog/pushbutton/product-lines/d16-series-illuminated-pushbutton-switches

Not sure if you've checked them out....

Maybe some dimensions could help narrow it down for anyone not familiar with the Focusrite to add  help.....

 

[weiss]

I‘m pretty sure they‘re made by EAO. Could it be this one?
https://www.mouser.com/ProductDetail/EAO/19-431035?qs=2pKMaj72wiF%2F8smYrHEAFw%3D%3D

 

[elskardio]

Maybe some dimensions could help narrow it down for anyone not familiar with the Focusrite to add  help.....

Yes the cap is really small... like 7mm.

 

[gyraf]

Original ISA115 switches were EAO brand.

 

[elskardio]

I‘m pretty sure they‘re made by EAO. Could it be this one?
https://www.mouser.com/ProductDetail/EAO/19-431035?qs=2pKMaj72wiF%2F8smYrHEAFw%3D%3D

Thanks for the info.

That's exactly the switch used in the Red series.

But the new Isa series uses a smaller cap. EAO switches can be ordered without the cap. Focusrite probably had one made for them...

Scratch that... it's the same switch. The cap is 7.3mm but the switch is mounted behind the front panel.

Thanks

 

[weiss]

Thanks for the info.

That's exactly the switch used in the Red series.

But the new Isa series uses a smaller cap. EAO switches can be ordered without the cap. Focusrite probably had one made for them...

Scratch that... it's the same switch. The cap is 7.3mm but the switch is mounted behind the front panel.

Thanks

Yes thats what i thought as well

 

[cmtk]

Hey guys, quick question, has anyone fitted these before? Is it a quick swap out or is soldering required? ISA 430
(quite a novice, I have soldered before but many years ago)

 

[JMan]

@thomasdf in case using the original switch is of interest in the Rouge Un. Maybe not worth it (it's a damn expensive switch), but there it is.

 

[thomasdf]

Thanks for mentionning me, interesting for sure ... I yet have to get to the point in the design process where I'll think about the switches haha !

 

[cmtk]

Thanks for the info.

That's exactly the switch used in the Red series.

But the new Isa series uses a smaller cap. EAO switches can be ordered without the cap. Focusrite probably had one made for them...

Scratch that... it's the same switch. The cap is 7.3mm but the switch is mounted behind the front panel.

Thanks

Hey, did you end up fitting this switch in your ISA? trying to find out if it was a simple process