BricktopRecording
Member
- Joined
- Dec 12, 2012
- Messages
- 17
I'm looking to sell these two items I haven't been able to get off the ground/finish-
Drip EQP1A Pultec PCB - Rev 1 Design 1 July 2010- untouched $100 +shipping
Classic API LC53A - Assembled (not working) without OP AMPS- Haven't had the time to get this working properly- here is the issue-
Audio passes extremely loud & distorted, both when ON and OFF- cutting / boosting frequencies seems to work though. Pretty sure its not an op amp issue as I swapped them out for ones that were working in my VP312's. $325 +shipping
LC53A
https://www.dropbox.com/s/d6t8n5gb68d7u5g/Screenshot%202014-09-24%2017.33.28.png?dl=0
https://www.dropbox.com/s/ijmeht8dl9go20d/Photo%20Sep%2024%2C%205%2015%2044%20PM.jpg?dl=0
https://www.dropbox.com/s/yyodu8y4p8xbfkz/Photo%20Sep%2024%2C%205%2024%2025%20PM.jpg?dl=0
DRIP
https://www.dropbox.com/s/p75vjfpc7nof0e4/Photo%20Sep%2024%2C%205%2025%2052%20PM.jpg?dl=0
Thanks
Pete
Drip EQP1A Pultec PCB - Rev 1 Design 1 July 2010- untouched $100 +shipping
Classic API LC53A - Assembled (not working) without OP AMPS- Haven't had the time to get this working properly- here is the issue-
Audio passes extremely loud & distorted, both when ON and OFF- cutting / boosting frequencies seems to work though. Pretty sure its not an op amp issue as I swapped them out for ones that were working in my VP312's. $325 +shipping
LC53A
https://www.dropbox.com/s/d6t8n5gb68d7u5g/Screenshot%202014-09-24%2017.33.28.png?dl=0
https://www.dropbox.com/s/ijmeht8dl9go20d/Photo%20Sep%2024%2C%205%2015%2044%20PM.jpg?dl=0
https://www.dropbox.com/s/yyodu8y4p8xbfkz/Photo%20Sep%2024%2C%205%2024%2025%20PM.jpg?dl=0
DRIP
https://www.dropbox.com/s/p75vjfpc7nof0e4/Photo%20Sep%2024%2C%205%2025%2052%20PM.jpg?dl=0
Thanks
Pete