FS or trade: Guitar Amp Project Enclosures

[buildafriend]

I have 13 combo amp enclosures that I'm taking offers on. I'm not trying to make a killing here, just looking for flip these for some quick cash. Condition from piece to piece varies so I chose the most middle of the road one for photos. They were about to be thrown away by a local boutique shop so I snatched them up, one for a build and the rest I'm selling.

Most of them have a logo on the grill cloth. If you pop the logo off there will be small hard to notice scuffs in the grill cloth. This can be covered by your own logo if you should decide.

the dimensions are roughly
10" deep
19" wide
20" tall

11" hole for the speaker which is good for most 12" speakers.

 

[buildafriend]

I should add that I'm not trying to make a killing on these. Low offers will be considered. These are great for anyone trying to build a combo amp. They can pretty easily be modified into plain old speaker cabs too. Depending on your taste you can modify these into open or closed back.

I'll post better pictures in the near future.

 

[insideout]

dang!  I'd take a couple but I'm in NZ!  Ideal for my nearly done ac15.

 

[ruairioflaherty]

Some basic info would be helpful

- Dimensions?
- What size is the cutout?
- What happens the grill when you remove the logo?

Thanks,
Ruairi

 

[dax]

13,  may have to start a build... Trade for some iron? I've got a huge nos Svt CL power transformer or some old fender 6l6 style

 

[buildafriend]

Sure, I would trade one for any classic model tube guitar amp or bass amp transformer. PM me with what you've got laying around that you're willing to part with.

I'll post dimensions when I get a chance to post better pictures. I'll also see what happens when the logo is removed. What do you mean by cutout? For the speaker or for where the electronics chassis would go? I'll try to just give everything a quick measure.

 

[ruairioflaherty]

What do you mean by cutout? For the speaker or for where the electronics chassis would go? I'll try to just give everything a quick measure.

Speaker mainly, I can't tell from the picture if that's a 5 inch hole or 15 inches.

 

[buildafriend]

The speaker hole cutout measures 11" when I measure strait across, from one side of the hole to the other. I'm not sure what size speaker would drop into that. But I'm guessing either a 10 or a 12, since I've never heard of an 11.

 

[buildafriend]

updated photos and measurements. BUMP