G7 - almost finished - which EF86?

[bockaudio]

it is better to reduce LF elsewhere.  Maybe the cap to the transformer.

This must be done carefully as it can increase the LF bump at cutoff, where the resonance of the xfmr meets the cap. I have seen this done on purpose and mistakenly in commercial products.

 

[VanGenz]

FINALLY!!! The source of the noise: I had fastened the third mic-cable cable going to the capsule-center a little wrong. I now fastened it between the rubbermount and the capsule according to the equinox-video, instead of on the outher-side of the rubbermount between the two washers. This gave a good contact, and the noise is now as low as in the Wunder in all three patterns, Wunderbar!