Hi everyone, I'm trying to figure out what to do with the K47s and CK12s I recently got from the groupbuy.
I bought 2 of each and 2 BM700 + 2 BM800, as donor bodies for my projects.
For the CK12s I'd like to make a set of C12/C414 style mics. I only used a couple of C414-TL2 (which I liked a lot), so I don't really know on which model should I take inspiration.
For the K47s I was planning on making one with valve and the other FET?
For both I'd like to make patterns and pad switches.
I know the schematic of the BM700/800 is not compatible with LDC, as it is developed for using it with electret capsules. And I also know BM700/800 chinese mics are not pro, but that's what I could get now.
I'm newbie on microphones engineering, I have experiences on electronics though, so I don't need explanations on the components but just clarification on the various schematics for mics.
Ok, finally the questions:
- which schematics should I use for the projects I'd like to achieve?
- is it worth modifying the pcb of these mics for any of my projects or should I just go for new PCBs?
- will you choose for making a set for the K47s or is it ok for one valve and one fet?
- will the valve style fit in these bodies?
- which model of mic body will you choose for the CK12s and which for the K47s?
Sorry fot the dumb questions, I bought everything in a GAS moment with lots of ideas, but now I don't really know what to do with them. I've read many posts talking of so many projects, schematics, pcbs and I feel a little confused now, so any opinions, suggestions or explanations will be very appreciated.
Thanks
Fabio
I bought 2 of each and 2 BM700 + 2 BM800, as donor bodies for my projects.
For the CK12s I'd like to make a set of C12/C414 style mics. I only used a couple of C414-TL2 (which I liked a lot), so I don't really know on which model should I take inspiration.
For the K47s I was planning on making one with valve and the other FET?
For both I'd like to make patterns and pad switches.
I know the schematic of the BM700/800 is not compatible with LDC, as it is developed for using it with electret capsules. And I also know BM700/800 chinese mics are not pro, but that's what I could get now.
I'm newbie on microphones engineering, I have experiences on electronics though, so I don't need explanations on the components but just clarification on the various schematics for mics.
Ok, finally the questions:
- which schematics should I use for the projects I'd like to achieve?
- is it worth modifying the pcb of these mics for any of my projects or should I just go for new PCBs?
- will you choose for making a set for the K47s or is it ok for one valve and one fet?
- will the valve style fit in these bodies?
- which model of mic body will you choose for the CK12s and which for the K47s?
Sorry fot the dumb questions, I bought everything in a GAS moment with lots of ideas, but now I don't really know what to do with them. I've read many posts talking of so many projects, schematics, pcbs and I feel a little confused now, so any opinions, suggestions or explanations will be very appreciated.
Thanks
Fabio