So I'm almost done building the GSSL. But after soldering the controls on, specifically the rotary switches, something seems off. In the components list, it says to use two 6 position rotary switches, for attack and release. But only attack has 6 positions, whilst release only has 5 positions. Shouldn't one of these switches have been a 5 position switch? I've soldered on the 6 position switch for the release, but I guess one of those positions will lead be unconnected open circuit. There are 2 different components lists that I have been looking at and there seems to be some confusion about these lorlin rotary switches. The list also call for two 3 position switches, but as far as I can tell only one 3 position switch should be used, for the ratio. One component list also calls for a 12 position switch?!?? For what exactly? I've been looking at these two components lists, this one and this one. Also it seems that the trimpots in the lists aren't really used at all in the design.
Last edited: