Hairball FET Rack Rev A Excessive Gain Reduction at Low Input Levels

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dinoxdann

New member
Joined
Mar 1, 2023
Messages
1
Location
Oklahoma
Hello, first post here. I've been having issues with my Hairball Rev A. I first thought it was a calibration issue, but after performing all of the calibration steps to spec my issue remains.

The unit compresses seemingly way too much when sending any signal at all through it. It renders it very difficult to use. Even with something like vocals, I'll have to set the preamp gain very low, and keep the input on the FET Rack almost all the way down.

Has anyone else experience a similar issue?
 
Back
Top