Help with API 312 PCB build

[Walrus]

You’re welcome.

 

[djmiggymigz]

Okay also just for the sake of helping my understanding (even tho I'm omitting it from my build), the logic behind the mute switch is probably just breaking all paths of signal -> output transformer right? Essentially so that signal is passing through the entire circuit up until that point at which point its just hitting a wall?

 

[Walrus]

Yes, in that Capi schematic the mute switch shorts both wires of the transformer to ground, and leaves the negative side of C10 floating.

 

[djmiggymigz]

Cool that's making sense thank you! Love this community, 2 weeks ago I couldnt look at a schematic and see what was happening at all. Getting there slowly but surely!

 

[anythingcansoundgood]

[My goal is to learn Kicad and pcb design] -- What have you learned so far? Have you downloaded the material I made available to you??? Are you going to send me your KiCAD files for further review???

/

Hi!

Sorry for the delay, I've had a lot going on and somehow missed your messages. I’ve downloaded the manual and learned a lot from online resources as well. There’s still plenty to master, but for these simpler circuits, everything is working well so far.

This first PCB was more of a proof of concept. It worked, but the mechanical design was lacking. The second version will be better laid out to fit my custom-built 500 series console, which has taken up most of my time recently. In fact, I just received the new PCBs for building it.

I've learned that spending time carefully planning your design saves you an incredible amount of time during the actual build. It's also much more rewarding when all the mechanical holes and connections line up perfectly. Once this project (the 500 series console) is finished, I’ll post the final product somewhere. I’m just really happy to see how much my designs have improved in only about six months.

 

[MidnightArrakis]

Hi!

Sorry for the delay, I've had a lot going on and somehow missed your messages. I’ve downloaded the manual and learned a lot from online resources as well. There’s still plenty to master, but for these simpler circuits, everything is working well so far.

This first PCB was more of a proof of concept. It worked, but the mechanical design was lacking. The second version will be better laid out to fit my custom-built 500 series console, which has taken up most of my time recently. In fact, I just received the new PCBs for building it.

I've learned that spending time carefully planning your design saves you an incredible amount of time during the actual build. It's also much more rewarding when all the mechanical holes and connections line up perfectly. Once this project (the 500 series console) is finished, I’ll post the final product somewhere. I’m just really happy to see how much my designs have improved in only about six months.

[It worked, but the mechanical design was lacking] -- I am also involved with "mechanical design" as well. See below:

>> 2U rack-chassis rear-panel mechanical design (BNC & XLR connectors):


>> PCB-backplane mechanical-detail fabrication drawing. PCB was used within an "FAA Air-Traffic-Controller" system:


>> PCB-assembly mechanical-detail assembly drawing for the above PCB:


>> PCB-motherboard mechanical-detail fabrication drawing that was "hand-drawn". PCB was used for an RCA color TV:


>> Mechanical design-fabrication drawing of a "foam-packing insert" used to house military equipment during shipping:


>> Mechanical & PCB detail-drawing for a LUNDAHL transformer that the manufacturer -- DOES NOT PROVIDE!!! --:

So.....whaddya need???

/

 

[MidnightArrakis]

Hi!

Sorry for the delay, I've had a lot going on and somehow missed your messages. I’ve downloaded the manual and learned a lot from online resources as well. There’s still plenty to master, but for these simpler circuits, everything is working well so far.

This first PCB was more of a proof of concept. It worked, but the mechanical design was lacking. The second version will be better laid out to fit my custom-built 500 series console, which has taken up most of my time recently. In fact, I just received the new PCBs for building it.

I've learned that spending time carefully planning your design saves you an incredible amount of time during the actual build. It's also much more rewarding when all the mechanical holes and connections line up perfectly. Once this project (the 500 series console) is finished, I’ll post the final product somewhere. I’m just really happy to see how much my designs have improved in only about six months.

[Sorry for the delay] -- I'm assuming that due to no further responses from you that everything has worked out just wonderfully and all is hunky-dory, right??? No issues with your KiCAD layouts and you have managed to design your PCBs with all of the proper tack and pad clearances, track-widths, pad sizes, soldermask reliefs, Copper-Pours, vias, drill hole sizes, annular rings, thermal-reliefs and so forth, correct. >> GOOD FOR YOU!!! <<

/