LA2A 369JX wiring schematic

[BSchex]

Does anyone have a 369JX wiring schematic for a point to point LA2A build? A wiring layout would be better yet. I am building an LA2A for use in US, so it would be powered by 110V outlet. I need the color scheme for the correct wiring.
Any help is appreciated.
Thanks

 

[fallout]

blue & black twisted to Hot (switch)
white & brown twisted to neutral
green to heaters
red to high voltage (power diodes)
green yellow striped/red yellow striped to chassis ground

The rest are unused. (cut and isolate)

https://www.hammfg.com/files/parts/pdf/369JX.pdf?v=1697661949

 

[BSchex]

blue & black twisted to Hot (switch)
white & brown twisted to neutral
green to heaters
red to high voltage (power diodes)
green yellow striped/red yellow striped to chassis ground

The rest are unused. (cut and isolate)

https://www.hammfg.com/files/parts/pdf/369JX.pdf?v=1697661949

Thank you... wish me luck!

 

[BSchex]

One more thing please. I ordered the case fromCollective cases and ordered the 8037 VU lamp 12 volt from hairball. It say within the description ...

• Configured to read 0db at 1.228V through an external 3.6k resistor +/- 10%

Should I switch out the R24 ( 3.9k ) resistor to a 3.6k resistor? Has anyone built one of these point to point LA@A with that Hairball VU meter?