Livingnote's PCB Lab

[LewKellogg]

Welcome back!

 

[livingnote]

Hey Lew How's it going?

Check this out: Local talent Anna Käse, who runs a print shop in my neighborhood, took one of
the PCBs I made and ran it through her printing press:

 

[Leek]

Could you make pcb for the following and look over design to help easy worries that it doesn't work?

 

[livingnote]

Hey

Sorry for the late reply, I had been checking my mail inbox for DIY messages and not the forum thread itself.

When in doubt, always send a mail to the address that appears when you click on my forum name here in the
thread (livingnote).

Yes, sure I can make a PCB for it, but it would be a design job (and looking over the design itself would also
be design work) - however I can not guarantee that a given circuit will actually do its job as intended - there
are many different designs floating around out there.

Do you have a schematic/source for it and an actual component overlay? Otherwise, it's just the ICs, and
there's no way I can help you unless I know what the components are and how they fit together - even simply
etching something is not readily possible only from this one picture (and looking at those traces I wouldn't
recommend it anyway).

Apart from that - yeah sure, looks like fun.

Cheers,

Lukas

 

[Kid Squid]

Hi Lukas, I've just emailed you,

Best,
Steve

 

[TubeMonkey]

[size=13pt]Hey everybody,

I'm back 

Lukas

Hey Lukas! Your inbox is full....  Are the Crush n Blend pcbs still available? Would you be willing to ship to the US?  Thanks in advance!

EB

 

[RuudNL]

Hey what kind of trimmers are those? Big long things that look like they go way precise.

Looks like they are channel preset potentiometers from a TV tuner!

 

[Hobbyist]

Looks like they are channel preset potentiometers from a TV tuner!

That's right, got it from my fathers backup stock. he repaired a lot of electronics back in the 80's and 90's.
Remember he told me these trimmers were from a VHS-player. They are fun to use, but not super precise

ps: sorry for the late response Lukas

 

[ilfungo]

Hi livingnote
I've tried to PM you but your box is full.
Thanks!

 

[mattmartin831]

Are you able to create a pcb based on a .lay circuit layout file?

 

[livingnote]

What kind of software is that?

 

[dagoose]

Hey Lukas,

looks like your inbox is full

Good to see your back, even though it seems  like you where back for quite some time already
I was wondering if still have Crush-N-Blend boards available and how much they are for 1 board (shipping to the netherlands).
I'm building a new mastering console and I was think of adding a wet/dry option to one of the inserts.

 

[Potato Cakes]

Email sent regarding etching for original Opto Grinder.

Thanks!

Paul

 

[audiophreak]

Hi Lukas ,
                    Glad to see you are back doing this, you made a few PCBs for me a long time ago.  I was wondering if you can make PCBs from PDFs - Kingston's Drive One - here - https://groupdiy.com/index.php?topic=41509.0

 

[TubeMonkey]

Hi Lucas,

Still trying to get in touching regarding ordering a few Crush N Blend pcb's. Please direct message me!

Thanks!

EB

 

[thomasdf]

Hello

Is the Crush n Blend a general dry wet mixing board, or does it only work with the GSSL or such?
Can I use it do add a single mono dry/wet feature to any design?
If yes, I am in for a board or even maybe kit if you have such an offer

Thanks

Thomas

 

[thomasdf]

Hello

Is the Crush n Blend a general dry wet mixing board, or does it only work with the GSSL or such?
Can I use it do add a single mono dry/wet feature to any design?
If yes, I am in for a board or even maybe kit if you have such an offer

Thanks

Thomas

 

[jcgriggs]

I would like to purchase a Crush 'n' Blend PCB to use with a Serpent Audio SB4000 that I will be building.  Are they still available?

Regards,
  John Griggs

 

[groselicain]

Hey Lukas, emailed you about a potential PCB order. Thanks!

 

[andre tchmil]

Can you explain what the crush'n'blend actually does ?
It seems to me that it is just  a simple crossfader circuit or do I see it wrong ?