Muzikk4Eva
New member
- Joined
- Sep 22, 2012
- Messages
- 3
Opened up the Sputnik to find a couple of the soldered wires came loose.
the connector ( found through Google )
------
7 pin connector :
1: Gnd
2: heater +6.68 vdc (goes to A+ on ckt board)
3: B+ 120.4 vdc (goes to B+ on ckt board) --
4: audio out to xlr pin 2 ???? <<< (Transformer, Why does it say pin 2?? )
5: audio out to xlr pin 3 ????? <<< (Transfomer, Why does it say pin 3?? )
6: heater return 0 vdc (goes to A- on ckt board)
7: no connection
This is how I have the wires now.
Pin 1 = Ground
Pin 2 = Yellow (( A+))
Pin 3 = Orange(( B+))
Pin 4 = 2ndYellow (( Going to Transformer ))
Pin 5 = Green (( Going to Transformer ))
Pin 6 = Purple ((A-))
Pin 7 = No Connection
Transformer:
Red((LOW)) ... 2ndYellow ((Pin 4 ))...Green((Pin 5))....Brown((HI)
------
It was working for a minute then it stopped....No signal to the audio interface...
What am I doing wrong???
the connector ( found through Google )
------
7 pin connector :
1: Gnd
2: heater +6.68 vdc (goes to A+ on ckt board)
3: B+ 120.4 vdc (goes to B+ on ckt board) --
4: audio out to xlr pin 2 ???? <<< (Transformer, Why does it say pin 2?? )
5: audio out to xlr pin 3 ????? <<< (Transfomer, Why does it say pin 3?? )
6: heater return 0 vdc (goes to A- on ckt board)
7: no connection
This is how I have the wires now.
Pin 1 = Ground
Pin 2 = Yellow (( A+))
Pin 3 = Orange(( B+))
Pin 4 = 2ndYellow (( Going to Transformer ))
Pin 5 = Green (( Going to Transformer ))
Pin 6 = Purple ((A-))
Pin 7 = No Connection
Transformer:
Red((LOW)) ... 2ndYellow ((Pin 4 ))...Green((Pin 5))....Brown((HI)
------
It was working for a minute then it stopped....No signal to the audio interface...
What am I doing wrong???