i jost got some 1:1 line o/p trannies out of a tab/telefunken distribution amp. they measure like +15dbu max - but in the area of +10db and up, they resonate acoustically. driving from a 40 ohms balanced load. should i be worried? :green: not that i'm completely worried, iimean, they do pass program material fine, even above +15db, but maybe, if they keep resonating, in the long run something could be damaged...
or is it that my scope presents too high a secondary resistance, meaning the secondary isn't loaded properly? hence i get power loss, resulting in physical movement of the trannie...?
or is it that my scope presents too high a secondary resistance, meaning the secondary isn't loaded properly? hence i get power loss, resulting in physical movement of the trannie...?