kiira
Well-known member
Hi,
I'mplanning out my next project - a 312 pre, eqp-1 and compressor in one box. I'm using Fabio's Neve style output board for makeup gain on the eqp-1 and it needs +/-24V. I goofed though thinking that the 312 also needed 24V. but it needs +-15-18 V. instead. I'd really like to power both of these from Fabio's PS board but it only has one adjustable +/- output.
So... should I:
Power the Neve style makup gainstage with 18V. Will it work ok?
Use a discrete op-amp that will use 24V. in the api instead of a melchor or 2520? Will that work?
Do something to drop the voltage from 24V to 18V after powering the makeup gain board? I've never done that on abipolar PS before so I'm not sure how
I'd use a +/- 24V. pre if I had to rather than put a second PS in this box coz I want itto be small and portable.
thanks,
Kiira
I'mplanning out my next project - a 312 pre, eqp-1 and compressor in one box. I'm using Fabio's Neve style output board for makeup gain on the eqp-1 and it needs +/-24V. I goofed though thinking that the 312 also needed 24V. but it needs +-15-18 V. instead. I'd really like to power both of these from Fabio's PS board but it only has one adjustable +/- output.
So... should I:
Power the Neve style makup gainstage with 18V. Will it work ok?
Use a discrete op-amp that will use 24V. in the api instead of a melchor or 2520? Will that work?
Do something to drop the voltage from 24V to 18V after powering the makeup gain board? I've never done that on abipolar PS before so I'm not sure how
I'd use a +/- 24V. pre if I had to rather than put a second PS in this box coz I want itto be small and portable.
thanks,
Kiira