how many do you need,,,,?john12ax7 said:Does anyone have a source for replacement nuts for Alps pots? I need M7 x 0.75 with a width of 11mm (see attached pic).
The 10mm width is common and available, but no one seems to have/use the 11mm version except for Alps.
I still have piles of 16mm 1x100kB (linear)pots, and 2x50kB (S taper) from my old kit company. These pots are a few decades old so will probably end up in a landfill, sometime after I do...john12ax7 said:Found some Alpha RD09 pots in the parts bin, but they too are 10mm, not sure about the RV16.
I probably need 100-200. But if the Alps pots I need are available, that's even better.
john12ax7 said:Sent you a PM but seeing now you replied here. Those values wouldn't work, but maybe the nuts would.
It's the perils of trying to do small scale manufacturing with off the shelf parts.
Enter your email address to join: