livingnote
Well-known member
Hey all,
I need a few distribution amplifiers for the studio here and since Ebay is traditionally overflowing
with Neumann V482 -6 nobody knows what to do with I got myself a stack of them.
Checked out the plans on kubarth.com and from what I can tell it's just a simple transformer input
to standard unity gain opamp and then...and here's the part I don't get:
...goes on to the output transformers with an MO-9 stage before hitting the trannys.
But on the actual cards as far as I can tell there's just the input opamp and that gets distributed directly
to the output transformers without an additional output amplifier stage.
Was this standard or changed after a while - that the MO-9 was done away with -, and from a workhorse-
building standpoint would it make sense to include them in a design? ^m looking to make a stereo version
that has two or three outputs on one card instead of 6x Mono.
I need a few distribution amplifiers for the studio here and since Ebay is traditionally overflowing
with Neumann V482 -6 nobody knows what to do with I got myself a stack of them.
Checked out the plans on kubarth.com and from what I can tell it's just a simple transformer input
to standard unity gain opamp and then...and here's the part I don't get:
...goes on to the output transformers with an MO-9 stage before hitting the trannys.
But on the actual cards as far as I can tell there's just the input opamp and that gets distributed directly
to the output transformers without an additional output amplifier stage.
Was this standard or changed after a while - that the MO-9 was done away with -, and from a workhorse-
building standpoint would it make sense to include them in a design? ^m looking to make a stereo version
that has two or three outputs on one card instead of 6x Mono.