Hi All , I have finally finished my dual Mila and couldn't be happier. I used Kingston's turret board layout, Cinemag CMMI-10C input, CM-9589L output as he used also. I had a custom PT made from Avel Linberg , secondaries - 220@100ma , 2x 9v@2A , 12v@500ma , 45v@80ma.
I perf-boarded the PSU's - used the Gyraf G9 HT circuit modified with help from ruffrecords from another project , used the heater circuit from the G-Pultec, wired the 9v secondaries in series and put a 5k trimmer in place of the 1k8 resistor to set it for 12.6vdc heaters, used the SSL9k phantom circuit and used the G-Pultec heater circuit again with a trimmer to set 12vdc for power ON indicator.
Everything seems to be working very well, all voltages are close or spot on, it sounds fantastic, no buzz or humm thanks to Kingston's build documentation.
Many Thanks to NewYorkDave, Kingston, ruffrecords and all , I have learned so much ... and have so much more to learn
here is a link to more pix - https://picasaweb.google.com/audiophreeek/NewYorkDaveMila?authuser=0&authkey=Gv1sRgCLO_4a79lOyAfg&feat=directlink