I'm mixing this project and am reamping / mixing through a board.
signal path is as follows.
Coming out of the individual outs on the back of a BLA modded 002 - into the line inputs on the boards'channels-fader on board is at 0- input gains are turned up to about 3 oclock ( -55 -60dB) and the meters barely jump- no pads on - i mix it- itvsounds wonderful off of the monitor channel on the board- get it as loud as i can without clipping and rerecord the 2 mix into ch 1 and 2 of the 002. Everything is sounding soooo good.
I then switch the monitor back to out of the 002 and i hear this ugly grindy warm hum on playback. Once the music is playing, the hum is hidden, but at soft points the hum is clear.
Anyone ever had an issue like g his before?
Capacitor issue maybe?
Thanks in advance.
The inputs sound great. Very clear.
signal path is as follows.
Coming out of the individual outs on the back of a BLA modded 002 - into the line inputs on the boards'channels-fader on board is at 0- input gains are turned up to about 3 oclock ( -55 -60dB) and the meters barely jump- no pads on - i mix it- itvsounds wonderful off of the monitor channel on the board- get it as loud as i can without clipping and rerecord the 2 mix into ch 1 and 2 of the 002. Everything is sounding soooo good.
I then switch the monitor back to out of the 002 and i hear this ugly grindy warm hum on playback. Once the music is playing, the hum is hidden, but at soft points the hum is clear.
Anyone ever had an issue like g his before?
Capacitor issue maybe?
Thanks in advance.
The inputs sound great. Very clear.