Official C12 Clone - Build and Support Thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
If you remember from a couple posts ago, the frequency response of each mic was nearly the same. Well, I got the C12 capsule from Mic & Mod, and did the test again. Spoken word, so the range is limited to my voice. Regardless, I think the result is interesting.
Like before, the green mic is still the 460 with the (almost full) mini-mod.

The previous response graph for reference:
Stock Capsule Response.PNG


The purple mic is now loaded with the C12 capsule from Mic & Mod.
Capsule - green stock, purple M&M K12.PNG

The purple mic definitely rolls off sooner up top in both graphs, so some part of it is definitely the circuit. BUT, it appears that the C12 capsule pushes that roll-off even harder. The rumble at the bottom is ambient noise, but the C12 capsule does grab more of it. I'm going to call this purple C12 build finished and move on to the next mic build. I've got this left over 32mm capsule that needs a home, and I've got just about everything needed to give it one :cool: .
 
Back
Top