Original EQP1A / S3 / 1R owner around?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

atticmike

Well-known member
Joined
Oct 28, 2011
Messages
502
Howdy fellas,

Is anyone of you in the possession of either of those EQ above mentioned?

And if so, would you mind running a graphical frequency response with tools such as Q-Clone to see what the boosts do?

I've been looking for the following boosts and cuts to compare this to my clones (all boosting numbers / positions relate to the engravings indicated on the unit):

- 60 Hz boost at one two, three, four and half way (5)
- 70 Hz boost at one two, three, four and half way (5)
- 3 kHz with the widest Q (broad to the far right) at one, two, three, four and half way (5)

I'd hugely appreciate it, if someone could do it.
 
Check the manuals from the original pultec. They have pretty extensive graphs in them.
 
alright, that'd suffice as well but someone doing it themselves would be great too :)

any chance an s3 manual might linger around someplace?
 
Back
Top