Panels for Big Faders

[alexc]

Where could a metal work challenged type such as myself get some decent panels for some p&g 100m faders ?

I'd really like to get a small console thing going, but sourcing some printed fader panels seems like an impossible dream.

The rest I can do !

Any suggestions ?  I'm thinking only small - 16 or so 

 

[ruffrecords]

I designed mine in Front Panel Designer and got Frank to make them. They worked out quite expensive singly so I designed a single panel that housed four faders.

Cheers

Ian

 

[hitchhiker]

Do you already have the faders?

  I'm planning on soon putting in the BM a black panel with 16 stereo 5k 104 mm  P&G's to match.
The faders are used and should be cleaned and oiled.

Lance

 

[Timothytitus88]

Hey!

I am in OZ, and can certainly help. Expect a PM shortly!

Cheers,

Tim

 

[alexc]

Thanks for the replies guys

 

[gar381]

I designed mine in Front Panel Designer and got Frank to make them. They worked out quite expensive singly so I designed a single panel that housed four faders.

Cheers

Ian

I did this exact same thing that Ian did for my Sphere project in Front Panel Designer and
Like Ian, I did it in 4 channel chunks for expense reasons.
Used Front Panel Express in Seattle to make them.  ( wish Frank was stateside  :-[)

These worked out very well.

GARY

 

[alexc]

Hopefully I can get something going over the next few months 

Looking at some of the precision metalwork of those around here is very inspiring.
My own metal work leaves a lot to be desired!

Now to start assembling some funds and get those P&Gs while I can 

 

[bernbrue]

https://groupdiy.com/index.php?topic=61171.msg782069#msg782069

Bernd