Panels for Big Faders

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

alexc

Well-known member
Joined
Sep 21, 2004
Messages
2,571
Location
Hobart
Where could a metal work challenged type such as myself get some decent panels for some p&g 100m faders ?

I'd really like to get a small console thing going, but sourcing some printed fader panels seems like an impossible dream.

The rest I can do !

Any suggestions ?  I'm thinking only small - 16 or so  :)
 
I designed mine in Front Panel Designer and got Frank to make them. They worked out quite expensive singly so I designed a single panel that housed four faders.

Cheers

Ian
 
Do you already have the faders?

  I'm planning on soon putting in the BM a black panel with 16 stereo 5k 104 mm  P&G's to match.
The faders are used and should be cleaned and oiled.

Lance
 
ruffrecords said:
I designed mine in Front Panel Designer and got Frank to make them. They worked out quite expensive singly so I designed a single panel that housed four faders.

Cheers

Ian

I did this exact same thing that Ian did for my Sphere project in Front Panel Designer and
Like Ian, I did it in 4 channel chunks for expense reasons.
Used Front Panel Express in Seattle to make them.  ( wish Frank was stateside  :-[)

These worked out very well. :)

GARY
 
Hopefully I can get something going over the next few months  :)

Looking at some of the precision metalwork of those around here is very inspiring.
My own metal work leaves a lot to be desired!

Now to start assembling some funds and get those P&Gs while I can  :)
 

Latest posts

Back
Top