benidubber
Well-known member
Hi,
happy new year!!
I've just breadboarded this circuit.
I'm making a spring reverb driver,
LM384 IC with a little high boost sounds great.
I made this with a cool passive high boost I found on AMZ website, a place full of clever ideas.
I also wanted to add a passive low cut control,
so I placed a 27mH inductor from signal to ground, thru a pot wired as variable resistance.
it works fine in my opinion but I wonder why I never saw this kind of low cut control...
which is the problem with it?
thanks for replies
sandro
happy new year!!
I've just breadboarded this circuit.
I'm making a spring reverb driver,
LM384 IC with a little high boost sounds great.
I made this with a cool passive high boost I found on AMZ website, a place full of clever ideas.
I also wanted to add a passive low cut control,
so I placed a 27mH inductor from signal to ground, thru a pot wired as variable resistance.
it works fine in my opinion but I wonder why I never saw this kind of low cut control...
which is the problem with it?
thanks for replies
sandro