Stumbled upon some interesting stuff - haven't had time to check out fully:
Voronoi toolpaths - converting Gerbers to pcb routing outlines (isolation milling)
Background article:
http://ftp.cnchungary.com/Varsanyi_Peter/Pdf-ek/PCB%20milling/PCB%20maras%20-%20valami.pdf
Software:
http://sourceforge.net/projects/visolate/
Anyone here knows it?
Jakob E.
Voronoi toolpaths - converting Gerbers to pcb routing outlines (isolation milling)
Background article:
http://ftp.cnchungary.com/Varsanyi_Peter/Pdf-ek/PCB%20milling/PCB%20maras%20-%20valami.pdf
Software:
http://sourceforge.net/projects/visolate/
Anyone here knows it?
Jakob E.