For Sale Repro metalwork (Fairchild, Teletronix, Neve) *added 8-channel housing

[ravachol]

PTP Teletronix LA-2A

From the very first run of such cases, when Analogvibes was prototyping here on GroupDIY.

€375
With Sifam meter: €525

*sold*


Fairchild 670 front-panel

Nice work, although the holes for the VU meters are not appropriate in my case: 2 1/8” is too small for Simpson model 47 type. This could be seen as a bonus, however, if one wanted to swap in a cheaper alternative.
€120



Neve 1073 enclosure

Metalwork for Neve series 80 style module. Powder-coated repro 1073 front panel. Three available; one with side panels, two without.
€160/each
€400 for all three

 

[ravachol]

some more pics…

 

[ravachol]

I also have one of Bruno’s excellent grey-version PTP cases available… if you’re going for an early version look.

€435

on hold

w/Teletronix-branded Sifam meter €585

 

[ravachol]

I found another 1073 enclosure.
Four units all together: €520

 

[ravachol]

I also have two extra 8x vertical rack housings for Series 80 modules, with a classy summing front-end, XLR connections, etc.

Some fantastic design work here from Sascha of B-bird. These pictures show the assembled unit; the ones for sale are still flat-packed, unassembled, fresh and untouched. PM for a shipping quote —these things are heavy. Note the 1/4” thick front-panel.

€400 each or two for €700

NB: modules, switches, knobs, LEDs and screws not included: this is just for the metalwork itself.